DVBviewer Pro Full Sürümler.

[serkanguzel]

En son çıkan sürümler için son mesaja gidiniz !

.
.

DVBViewer Pro v6.1.6.1

[Only registered and activated users can see links. ]




Change Log DVBViewer Pro 6.1.6( 12 Şubat 2020 )

Added: Subtitle Options: Checkbox “Use teletext font for teletext, ATSC and ISDB subtitles” (default unchecked). If switched on, DVBViewer uses the (usually mono-spaced) font specified on the Teletext Options page for the mentioned subtitle types, which are typically output in a grid with fixed character positions. If switched off, DVBViewer uses the font selected on the Subtitle Options page and particularly displays teletext subtitles with variable spacing in case of a proportional font, thus enhancing the appearance and readability. However, not aligning the output to the teletext character grid may also have disadvantages (see here).

Added: Subtitle Options: Settings for adjusting the synchronization of subtitles with video. The value in the delay input line lets the subtitles appear x milliseconds later, or earlier in case of a negative delay. Checkboxes allow to separately switch the delay on and off for different subtitle types. A change takes effect immediately, but is reset on channel switching, stopping the video or if the Options Window is closed, unless clicking Apply makes it permanent.

Removed: Subtitle Options: Checkboxes in the Appearance section for switching shadow, outline and background transparency off. This can as well be achieved by moving the sliders to their leftmost position.

Removed: Teletext Options: Sliders for adjusting background transparency and outline of teletext subtitles. The functionality is now covered by correspondent sliders on the Subtitle Options page.

Fix: Hardware Options: Updated device list entries were not marked as available after “Scan Devices”, causing tuners, that were displayed in red due to a wrong device name, to remain red, though the name was corrected. “Scan Devices” did not add the SRx1000 entry (read from an updated hardware database) to an already existing DVB-C tuner in the file hardware.xml.

Added: Hardware Options: The TS Stream device settings dialog contains a new input line “Replace in URL”, allowing to vary the processed URL per device. It applies to HLS, internet radio and transport streams wrapped in HTTP(S). The syntax is [placeholder]=[device specific string], e.g. @@=username: password. A use case is described here (IPTV provider requiring x different accounts for receiving x streams simultaneously).

Fix: Hardware: If TBS 5520/5580 multistandard devices were configured and used for ISDB-T reception, DVBViewer switched the tuners to DVB-T mode on tuning (see here).

Fix: EPG: The erroneous “\n” inserted by some Austrian providers as line break indicator is now automatically replaced by a DVB compliant line break on EPG data reception.

Change: EPG: Auto-detection of the ISO 6937 and ISO 8859-2 character sets for some East European countries (particularly Poland, Romania, Hungary) where providers indicated them wrongly in the past years. DVBViewer now first assumes ISO 6937 and then tries to find a proof for ISO-8859-2 (previously the other way round). This handles true ISO 6937 always correctly, but may fail in certain cases where ISO-8859-2 is used with missing indication (see here).

Fix: EPG Window: When opened for the first time between 00:00 and 00:15 o'clock, the timeline showed an empty EPG for Saturday, 30 December 1899 (see here).

Fix: Channel Editor: Issues when using the New button while an audio sub-node is selected or after it was selected. The input form was not adjusted to the parent reception type or controls remained deactivated though a category was selected subsequently.

Added: TS Stream: Support for channels broadcasting via internet in HLS format with audio tracks provided as separate streams.

Added: TS Stream: Tweak “Receive all audio tracks of HLS streams” (→ launch Tweaker.exe). If switched on DVBViewer fetches all available audio tracks of HLS streams from the server, thus occupying more bandwidth. If switched off only the main audio track (marked as default by the provider) is fetched.

Fix: DVD Playback: Resuming playback at the last position could fail due to potential timing issues when retrieving the Disc ID.

Fix: Recorder. Lazy program response caused by uselessly repeated tune attempts once per second in case of a whole transponder recording, if the allocated device was not usable for this purpose. This particularly applied to all RTSP network devices, that by default are not configured for delivering a whole transponder. DVBViewer did not realize this until tuning was performed. Now only devices are allocated for such recordings, that either deliver the whole transponder anyway (most BDA devices) or can automatically be configured for it (unused RTSP network devices). However, whole transponder recording with RTSP devices may still be hindered by servers that do not support the pids=all parameter or by insufficient network bandwidth.

Fix: Main Window: Horizontal resizing of the Radio Window did not work correctly, if the mode was selected manually in the View menu (not by Options → TV/Radio → Auto-switch to TV/Radio Window.... ).

Added: Zoom Presets: Tweak “Number of zoom presets” (→ launch Tweaker.exe). It can be used to change the number of zoom presets. Four presets are set up by default. The Preset #x button in the Settings -> Zoom window or the "Zoom Next Preset" action switch over to the next preset.

Fix: HbbTV: Issues with Swiss HbbTV (see here) and other channels using erroneous JavaScript or broadcasting a HbbTV Application Information Table (AIT) with more than one section (particularly “Das Erste” in Germany).

Fix: HbbTV: If the tweak “Use browser cache for HbbTV” (see Tweaker.exe) was switched off, DVBViewer failed to clear the HbbTV cache completely, because files were still in use. Clearing the cache is now done right after DVBViewer start.

Fix: Component Downloader: Bug causing error code 406 in the server response on DVBViewer installation and when using the downloader separately.




Change Log DVBViewer Pro 6.1.6.1 (Hotfix Release) ( 16 Şubat 2020 )

Fix: Component Downloader: The bug causing error code 406 was still present due to a wrong file version in the 6.1.6 setup.

Fix: TS Stream: In case of channels broadcasting via internet in HLS format with separate audio streams audio was not played correctly under certain timing conditions.

Fix: TS Stream: The host field in the HTTP header was not set correctly, possibly causing an error message from the server.

En son çıkan sürümler için son mesaja gidiniz !

"DVBViewer Pro v6.1.6.1" sürümüne ait orijinal setup dosyası ve crack dosyası.

**Hidden Content: Reply or Thanks to see the content**

En son çıkan sürümler için son mesaja gidiniz !

[serkanguzel]

En son çıkan sürümler için son mesaja gidiniz !

.
.

DVBViewer Pro v7.0.1.0

Change Log DVBViewer Pro 7.0.1.0( 30 Aralık 2020 )


Change Log DVBViewer Pro 7.0.1 (Bugfix Release)
Change: General: HTTP Wiki URLs in DVBViewer and the German and English language files have been changed to HTTPS.
Fix: Recording Timers Options: DVBViewer did not keep the “Include Teletext, DVB Subtitles…” etc. settings after a restart.
Fix: COM Interface: The interface for adding timers was not compatible with old add-ons (particularly Zappi).
Fix: Channel List: DVBViewer did not not show EPG hints on mouse over, though "Show EPG Hints" in the context menu was switched on (applies to the Popup channel list and the Channel List, EPG and Timer Recordings window).
Fix: Favorites Menu: The items did not show EPG hints on mouse over anymore, after a hint appeared in a tree view or list view.
Fix: TS Stream: DVBViewer displayed no EPG for TS Stream channels delivered via HTTP by receivers/servers like Dreambox or VU+.
Fix: EPG Window: Wrong channel assignment on the “EPG per Channel” tab after changes in the Channel Editor. The wrong channel was displayed in the details after selecting an EPG item and also assigned to scheduled recordings that were created from this tab (see here).
Fix: Timeshift: Stuttering timeshift playback if the timeshift recording was located on a (remote) network share, due to an insufficient read buffer size.
Added: Media Server Client: Tweak “Allow timeshift delegation to a remote Media Server” (→ launch Tweaker.exe). Enables DVBViewer to delegate timeshift recordings to a Media Server on another PC. EXPERIMENTAL! The "Delegate timeshift recordings" tweak must also be switched on. Additionally the Media Server MUST be configured to write timeshift recordings to a shared directory with a network (UNC) path (see Media Server Options -> Recordings). Please note: There is no protection against incorrect usage!
Fix: Media Server Client: DVBViewer could not connect to a Media Server that is protected by username and password (see here). If a username and password for the Media Server was set up on Options -> DVBViewer Media Server, DVBViewer did not respond anymore to user actions for some seconds after receiving a message from the Media Server (see here).
Fix: OSD: The OSD record indicator was not updated on recording start/stop if the main window toolbar was hidden (particularly in full screen mode).
Fix: MHEG-5: MHEG-5 did not work with the HbbTV/MHEG-5 add-on, though the HbbTV/MHEG-5 add-on was installed.
Fix: Hardware Options: The tuner type selection has been re-enabled for HDHomeRun devices. It is required because the tuner type information exposed by the driver is ambiguous (see here).

En son çıkan sürümler için son mesaja gidiniz !

"DVBViewer Pro v7.0.1.0" sürümüne ait orijinal setup dosyası ve crack dosyası.

**Hidden Content: Reply or Thanks to see the content**

En son çıkan sürümler için son mesaja gidiniz !

[serkanguzel]

En son çıkan sürümler için son mesaja gidiniz !

.
.

DVBViewer Pro v7.1.2.1

Change Log DVBViewer Pro 7.1.2.1( 22 Ağustos 2021 )


Change Log DVBViewer Pro 7.1.2.1 (Bugfix Release)
Fix: Recording Playback: Recordings of a local Media Server on the same PC were not accessed directly (as intended), but via Media Server streaming (since version 7.2.0).

Fix: EPG: The import of external EPG data via Xepg did not work anymore (since 7.1.2.0).

Added: OSD: “Only With EPG / Also Without EPG” option in the OSD timeline context menu, that appears after pressing OSD Blue / F8. It specifies if only channels with EPG or also channels without EPG are displayed in the timeline

En son çıkan sürümler için son mesaja gidiniz !

"DVBViewer Pro v7.1.2.1" sürümüne ait orijinal setup dosyası ve crack dosyası.

**Hidden Content: Reply or Thanks to see the content**

En son çıkan sürümler için son mesaja gidiniz !

[serkanguzel]

En son çıkan sürümler için son mesaja gidiniz !

.
.

DVBViewer Pro v7.2.4.0

Change Log DVBViewer Pro v7.2.4.0( 23 Nisan 2023 )


Change Log DVBViewer Pro 7.2.4.0

Change: Recorder: Handling of loading/saving the timer list from/to the file timers.xml for avoiding data loss on crashes (see here):

If the file timers.xml can not be loaded, because it is corrupted, DVBViewer now automatically replaces it by the file timers.bak, which contains the previous timer list state before the last saving. Previously DVBViewer preserved an already existing timers.xml by renaming it to timers.bak before saving a new one, but did not use it.

If the file timers.xml is detected as invalid on loading, it is deleted or renamed, so it cannot become timers.bak anymore on next saving. Renaming occurs if there is still some content in the file. The new name is timers[yyyymmddhhnnss].bak, where [yyyymmddhhnnss] is the current date and time, e.g. timers20230105100634.bak. This file can be used for manual repair attempts.

DVBViewer now avoids unnecessary saving of the timer list right after loading the timers.xml on DVBViewer start and before the PC enters sleep mode / hibernate. In the latter case usually all timer list changes have been saved before. However, the list is still saved on closing DVBViewer “just in case” to make sure that the current state of the timer list is identical with the one on disk. Normally this yields identical timers.xml and timers.bak files.

Added: Timer Recording and Recording Statistics Window: The list views in these windows now also respond to tilting the scroll wheel or rotating the horizontal scroll wheel by horizontal scrolling (previously only in the EPG Window).

Fix: TV/Radio Playback: On Rebuild Playback the (stored) ID of the last channel was overwritten by the ID of the current channel, so that the Last Channel function subsequently performed a retune instead of returning to the previous channel.

Added: Channel Editor: Automatic conversion of a user agent indication in imported M3U IPTV lists (#EXTVLCOPT:http-user-agent=…) to an equivalent DVBViewer URL appendix (?addhdr=User-Agent:…, see here).

Change: Channel Search: In order to make a channel search more comprehensible for first-time users, the “Scan” button on the Reception Settings panel and the “Scan Range” button on the Channel Search panel have both been renamed consistently to “Channel Search” (see here). However, the function remains unchanged. It lets DVBViewer scan all frequencies starting with the one selected in the “Start” field up to (and including) the one selected in the “End” field.

Change/Added: Channel Search: The “Scan Frequency” button above “Scan Range”, that previously let DVBViewer scan a single frequency selected in the “Start” field, has been substituted by a different button at a different place. Altogether there are three possibilities to scan a single frequency:

The new “Scan” button next to the “Start” field for scanning the frequency selected here.

The new “Scan” button next to the “End” field for scanning the frequency selected here.

The “Scan this Frequency” item in the (right-click) context menu of a selected channel for scanning its frequency. It does not change the start frequency to the channel frequency anymore, previously requiring an additional click on “Scan Frequency”, but immediately triggers the scan.

Change/Fix: Subtitles: Enhancements concerning TTML subtitles, that are preferably used for MPEG Dash streams. Additional styling methods for colors, markup and text position are now recognized and applied.

Fix: Subtitles: DVBViewer used “fully transparent” as wrong default value for subtitles background. It was temporarily adjusted to the intended “half transparent” by opening the subtitle options, but permanently corrected only by applying them after some change.

Added: Hardware Options: Tweak “Allow BDA tuner re-detection by name” (→ launch Tweaker.exe). Switching this option on allows DVBViewer to re-detect BDA tuners by name if Windows has changed the hardware ID (e.g. after driver installation or a reboot). Retrieving "lost" tuners is performed on DVBViewer start. It avoids "No matching DVB device available" messages and a manually performed "Scan Devices" (see here). Please note: This option should only be applied if really necessary, because two or more tuners with the same name and tuner type (DVB-S/T/C) could be mistaken for each other. After a resulting automatic correction of hardware IDs DVBViewer updates the file hardware.xml immediately.

Change: Hardware: On tuner availability checks and tuner initialization DVBViewer now only searches for a device with matching ID in the Windows device enumeration. It does not additionally compare the tuner name anymore (see here).

Fix: Hardware Options: For some hybrid/multi-standard BDA tuners a wrong identification string was created on device detection and subsequently transmitted to other simultaneously running applications from the DVBViewer family (e.g. TransEdit), so that they could not recognize a tuner occupation by DVBViewer and vice versa. Please note that performing a new device detection in Settings → Options → Hardware is necessary for the fix to take effect.

Change: TS Stream: Changed timing when receiving radio streams in order to avoid problems with unsteadily arriving data.

Fix: HbbTV: “arte Mediathek” did not work anymore, caused by a changed HbbTV version indication in the HbbTV user agent string (since 7.2.3).

Fix: HbbTV: Due to a bug ARD and ZDF HbbTV videos did not become visible in Automatic Color Key mode, because they remained covered by the HbbTV OSD. Furthermore, due to the same bug, the playback of ZDF HbbTV videos was stopped after some time (since 7.2.3).

Fix: HbbTV: An additional empty line in the HTTP header could cause servers to send no response.

Fix: General: A runtime library function for conversion of 64 bit integer numbers to text yielded wrong results (particularly concerning Channel IDs), if DVBViewer was running on Apple hardware with ARM M1/M2 CPU in a Parallels Desktop virtual machine.

Fix: General: Uninstalling DVBViewer left a still installed Media Server in an unusable state and even prevented uninstalling the Media Server subsequently, if the user opted for DVBViewer program directory deletion. Therefore the DVBViewer uninstaller now prompts the user to uninstall the Media Server first, if it finds DVBVservice.exe, and terminates without doing something.

Updated: OpenSSL Libraries to version 1.1.1t (see here).

En son çıkan sürümler için son mesaja gidiniz !

"DVBViewer Pro v7.2.4.0" sürümüne ait orijinal setup dosyası ve crack dosyası.

**Hidden Content: Reply or Thanks to see the content**

En son çıkan sürümler için son mesaja gidiniz !

[serkanguzel]

.
.

DVBViewer Pro v7.3.0.0

Change Log DVBViewer Pro v7.3.0.0( 19 Mayıs 2024 )


Change Log DVBViewer Pro 7.3.0.0

Added: Picture in Picture: The Picture in Picture window now remembers the last played channel and restores it when it is opened without specifying a particular channel, e.g. via TV/Radio → Picture in Picture. Previously it always played the same channel as the DVBViewer main window in this case. Now it only falls back to the main window channel if no tuner is available for the last PiP-channel.

Change: Picture in Picture: The mute function in the DVBViewer main window now also mutes Picture in Picture audio, if switched on. Previously the function had no effect on it.

Fix: Picture in Picture: When displaying Picture in Picture in a separate full screen video window, the video aspect ratio was not adjusted correctly, if the monitor aspect ratio differed from it, except when using the EVR Enhanced Video Renderer for PiP, which worked as intended.

Added: General: Command line parameters allowing to launch additional DVBViewer instances if DVBViewer is already running, thus enabling to play multiple channels at the same time, provided there are enough tuners available (see here). It is not necessary anymore to create additional program directories. The parameters can be added to a DVBViewer shortcut by appending it to the DVBViewer path (separated by a blank) in the shortcut properties. Each instance carries a unique instance number in the range from 1 to 8. Please note the following points:

There are two ways to start additional DVBViewer instances:

The command line parameter -new starts another DVBViewer instance additionally to already running instances. The instance number of the new one is the number of already running instances plus one.

The command line parameter -N (where N specifies the instance number, e.g. -2 or -3) starts an instance with this number. Using -N parameters should not be mixed with -new usage. Please note that an instance does not start, if an instance with the same instance number is already running.

Each additional instance automatically creates its own configuration folder, if it does not exist yet, copies missing configuration files from the original configuration folder (of the first instance) to the new folder and uses it henceforth. If the original configuration folder is named CMUV\DVBViewer, the one for the second instance is CMUV\DVBViewer_2, for the third instance CMUV\DVBViewer_3 and so on. Initially the configuration of additional instances equals the configuration of the first instance in every respect (settings, channel/favorites list, window size/position etc.), but can be changed separately and persistently. If an additional instance shall again adopt the original (first instance) configuration in CMUV\DVBViewer, this can be achieved by simply deleting the configuration folder CMUV\DVBViewer_N of the corresponding (number N) instance, while it is closed.

Add-ons and plugins (DLLs) may not cooperate correctly (or not at all) with additional DVBViewer instances, if they are not designed for it.

The Tweaker.exe and Resizer.exe tools, that are installed with DVBViewer, by default use the setup.xml of the first instance. However, it is possible to let the tools modify the setup.xml of other instances, either by launching them with the command line parameter -N, where N specifies the instance number, e.g. -2 or -3, or by dragging and dropping the file setup.xml from the configuration folder of the instance in question to the Tweaker or Resizer program icon.

Every starting new DVBViewer instance automatically mutes audio of already running instances (provided it does not start muted itself), thus avoiding multiple audio playing at the same time. Clicking the video area or the status bar with the middle mouse button lets an instance “grab” audio and play it exclusively by muting all other running instances. Please note that the middle mouse button click in the video area was assigned in former DVBViewer versions by default to an OSD function. So for achieving the desired effect on audio, Settings → Options → OSD Mouse → Middle Mouse Button Function has to be set to “None” first (see here). If Picture-in-Picture audio is switched on in an instance (e.g. by clicking the PiP window with the middle mouse button or switching it to full screen), it automatically mutes main window audio and all other running instances in the same way.

When running more than one DVBViewer instance, it is recommendable to use the DVBViewer Media Server for centralized DVB hardware management. It avoids conflicts, enables optimized hardware usage and allows to prioritize timer recordings. The Media Server Basic, that is free for DVBViewer Pro users, is sufficient for this purpose (see here).

It is not possible to run multiple instances of the free DVBViewer Demo version. The feature requires the full version.

Added: General: Basic support for VVC video (see here). Scanning channels with VVC video and recording them as TS works. Playing them may fail, because the support is not complete yet. Therefore playback of files/streams containing VVC video is delegated to the LAV source filter/splitter, if possible, even if DVBViewer is configured for playing a format with the DVBViewer Filter. Please note that there is no VVC video support in LAV filters before version 0.79.

Change: Playback Components: DVBViewer now checks if the graphics card and its driver support Overlay for video output. If not, the Overlay Mixer is not selectable as video renderer anymore and Desktop TV (that requires Overlay) is disabled in the View menu. If Overlay is available, DVBViewer automatically adds a registry entry that is needed on some PCs to make it work in an application. It requires a DVBViewer restart to take effect, however (see here).

Added: Desktop TV: Desktop TV (see View menu), that enables TV/Video as desktop background, is now available in all video renderer modes (previously only with the Overlay Mixer), provided the graphics card supports Overlay video. DVBViewer automatically switches to Overlay rendering for Desktop TV, which requires rebuilding the chain of playback components if some other video renderer is active. The same applies to switching Desktop TV off again. Please note:

It is recommendable to activate the DVBViewer tray icon on Options → General for controlling DVBViewer in Desktop TV mode, because its main window can’t be accessed. Right-clicking the tray icon opens the DVBViewer context menu. Left-clicking the icon restores the previous display mode.

Depending on the graphics card/chip and the video format the LAV video decoder may not be able to handle the old overlay rendering mode correctly. In this case you may want to try ffdshow as video decoder for the affected format.

Change/Fix: OSD: Several optimizations and fixes concerning the OSD handling if certain video renderers are used, e.g. flickering outside the OSD display area caused by the EVR Custom Video Renderer with activated DXVA scaling after reducing the OSD size in the OSD General options, or incorrect display of a video windows embedded in OSD pages in Overlay mode after resizing the DVBViewer Main Window.

Removed: OSD General Options: Checkbox “Use cut-out frame in Overlay mode”. This option is now always switched on, which means, the area surrounding the actual video is always painted black, thus covering the dark purple Overlay color. Additionally the black frame now also works in case of OSD size adjustments in the OSD General Options.

Added: OSD General Options: The slider for OSD transparency now also takes effect if the MPC Video Renderer or the EVR Enhanced Video Renderer (only with “Use OSD DirectShow filter” switched off) is used.

Fix: Channel Logos: Unnecessary checks if a channel logo image file with a hyphen (-) as name exists, causing channel logo processing to take too long (since 7.2.5.0, see here).

Fix: TTML/WebVTT Subtitles: Occasional timing issues caused by wrong handling of TTML timestamps. TTML subtitles are frequently used for MPEG Dash streams (particularly live streams provided via HbbTV). WebVTT subtitles were displayed in wrong order under certain timing conditions.

Added: Playback: If DVBViewer is operating as Sat>IP client, the “Options → General → Resume playback after sleep mode / hibernation” function now additionally ensures that playback does not resume until the Sat>IP server is reachable, checked by a ping once per second (see 7.2.5.0. changes).

Fix: Audio Visualizations: The visualizations did not work anymore on radio/audio playback, if the EVR Custom Video Renderer was selected on Settings → Options → Playback Components → Video (since 7.2.5.0, see here).

Fix: Channel Search: A missing Transponders subdirectory in the configuration directory was not recreated automatically. Since this subdirectory is usually created by the setup wizard on first DVBViewer installation, the bug only took effect in special cases.

Change/Fix: EPG: The EPG start/end time and duration are now stored non-rounded as they arrive, but are rounded to minutes later when being read from the EPG database, e.g. for displaying them somewhere. Previously they were already rounded on arrival. The change avoids issues with internet radio (shoutcast) metadata that is transformed internally to EPG data (see here).

Fix: Recorder: Under certain conditions transport stream packets with video filler data were not removed, though configured by the user and possible (see here).

Added: Universal Remote Plugin: Checkbox in the configuration window allowing to switch the plugin’s tray icon on and off. The plugin is included in DVBViewer standard installations.

Fix: Hardware: Increasing the DiSEqCCount default value for TBS DVB-S devices to 2 in version 7.2.5 (causing every DiSEqC command to be sent two times) proved to be unfavorable in case of Unicable (see here). Therefore DiSEqCCount is now decreased by 1 if (and only if) it is greater than 1 and Unicable DiSEqC commands have to be output with a TBS device.

Added: Installer: Checkbox for adding a firewall rule that allows DVBViewer to receive UDP data from the internet (particularly multicast TV like MagentaTV, see here). The same can be achieved by executing DVBViewer_IPTV_Firewall_Rules.bat from the DVBViewer program directory with administrator rights. Please note: Must only be used in a home network behind a router!



"DVBViewer Pro v7.3.0.0" sürümüne ait orijinal setup dosyası ve crack dosyası.

**Hidden Content: Reply or Thanks to see the content**